Pairing and Updating Atmoph Scope

You can pair a new Atmoph Scope from Menu > Settings > Atmoph Scope.

Once pairing is complete, if a new firmware version is available, the option to "Update" will become selectable. You can update the firmware using that button. Please note that a battery level of 80% or higher is required for the firmware update, so make sure to charge the device before proceeding.

Pairing procedure

1. Select "Settings" from the "Menu".

2. Select "Atmoph Scope".

3.  Select "Pairing", then press and hold the power button on the Atmoph Scope for about 3 seconds until the power button flashes (pairing mode).

4. When pairing is complete, the screen will change to "Connected".

If there is a new firmware for Atmoph Scope, select "Update" to update.
* Please note that a battery level of 80% or higher is required for the firmware update, so make sure to charge the device before proceeding.