Atmoph Window 2 wall-mount kit

Atmoph Window 2 wall-mount kit makes almost no marks on the wall of gypsum board. It can be used when installing Atmoph Window 2 on a new wall or when moving. The hook has a large barb and is more stable than a general screw.
* This kit is NOT including Atmoph Window 2.

Atmoph Store : Atmoph Window 2 wall-mount kit

How to use:

Step 1. Put the Wall Mount Guide on the wall, horizontally

Step back to check the level. You may want to use a level if you have.

Step 2. Place nails/screws/hooks at the center of + mark

Step 3. Remove the guide

Step 4. Plug the power cable

Step 5. Hang the metal place inside the mounting holes to the hooks

Step 6. Make sure it's firmly hanged and done!